String art sign for my studio

If you’ve been following me on Instagram you may have spotted that a few weeks ago I attempted my first piece of string art. String art has been around since the 70s and can be either incredibly simple or extremely complex. Once you start browsing Pinterest and looking at how people have used the concept you’ll be blown away with the potential of it.


I wanted to create a sign for my studio largely because it was being photographed for a book about She Sheds and it was an effective way of squeezing in a bit of branding! Here’s what I started out with… The wood for the sign was a simple pre-cut soft word plank which came from B&Q


If I’d known this was going to be a successful project I would have sourced my equipment a bit better. As it is nearly everything in this photo had changed by the end! The packet of Panel Pins was what we had in the garage and I ran out of them halfway through the project and then couldn’t find an exact match! The embroidery thread was from my stash and it turned out it just wasn’t thick enough to be effective and even the hammer wasn’t right, I ended up buying a small toffee hammer!

But anyway, here’s how the process works! To begin with you measure your wooden surface and work out how big you want your art or wording to be, then print a template, I used Photoshop to do mine. Cut the letters out and attach them to the wooden surface with selotape. I used a piece of string fixed with drawing pins at each end to create a horizontal line to work on.


Once the template letters are stuck down you can start knocking in the panel pins and the fun begins! It’s tempting to spread the pins out, but the closer you can get them the more interwoven your thread will be and the better it will look. I learned that the hard way. As you can see I’m only one letter in and I’ve already switched hammers…


Once the pins are all in you can start the fun part… or if you are ridiculously impatient like me you can strat the fun part before you’ve done all the pins, just so you can see how it’s going to look! My new embroidery threads came from The Eternal Maker. I went into the store with a copy of my blog logo and matched up the colours as closley as I could.

string art sign in progress using embroidery thread

It was at about this stage when Jim said to me “You’ll hate me for this, but I really think you should have painted the wood” – I was too far in to turn back! I should warn you string art is very relaxing and great fun, but it takes ages to do and every now and again as you are twisting the thread round one of the pins it unloops and spirals backwards unlooping round half a dozen pins and taking you back several steps – aaahhh!

Despite everything I did manage to finish the main part of the sign in time for the photographs, but I deviated from my original plan to do smaller string letters underneath and cheated by cutting them out of felt. For a first attempt I’m pleased with the result, but next time I’d use panel pins with slightly bigger heads, put them as close together as I can and yes…. paint the board!

string art sign for studio stringart11

Next time I’d love to do a large picture, though based on how long this took I think that would be quite an epic project… maybe something for the winter! If you are inspired by the concept have a look at some of the examples on the Pinterest board I created…

If you liked this, you might also like…

I’ve been blogging for 11 years and making creative content for my entire working life. I work with brands on rewarding and original content creation, both on my channels and theirs and I sell my images via Getty & Alamy image libraries. On this blog I share stories of creative family living as well as my photography and videos. If you’d like to get in touch, please email me. (link at top of page)
no comments
Add a comment...

Your email is never published or shared. Required fields are marked *